CF/GF LINES · 1.75 MM · 1 KG
Seven fiber-filled lines. Zero unverified numbers.
Line card, per SKU
on Amazon US
This is the quiet end of the catalog: carbon-fiber and glass-fiber lines from PLA-CF at $18.99 up to PPS-CF at around $40 a kilo. Fiber-filled materials are bought on data, not adjectives, so this page makes a deliberate choice: it lists the SKUs and the prices, and it stops there.
Every line in this family is batch-documented. Ask for the TDS before you buy; we would rather you have the data than our word for it. Send the request through the wholesale form with the SKU you are considering, and the datasheet for the current batch comes back to you.
COLOR LIBRARY
Fiber-filled lines are about the fiber, not the color grid. The finish is the material itself.
THE DATASHEET
| Property | Value |
|---|---|
| Diameter | 1.75 mm |
| Net weight | 1 kg |
Datasheets for this line are supplied per batch, on request.
Request the TDSValues shown are representative for this material class. Final figures come from the manufacturer's datasheet. Request the TDS for batch-specific data.
USE-CASE GUIDANCE
PLA-CF and PLA-GF print easiest and make stiff jigs on any machine. PP-CF and PP-GF bring chemical resistance and toughness. PA6-GF, PPA-CF, and PPS-CF climb the temperature ladder and want a dry box and a hot end that means it. The fiber stiffens; the base polymer decides everything else.
See PCTGEvery fiber-filled line assumes a hardened steel nozzle and benefits from direct drive. Fiber fill abrades brass in a single spool. If your machine is stock, budget the nozzle swap with the filament, not after it.
See ABSRequest the batch TDS through the wholesale form, check the figures against your part requirements, then order from the storefront. It is one extra step, and it is the step that separates an engineering purchase from a gamble.
See PETGPrint tips
THE HONEST BIT
Every material has a job. Here is where this one belongs, and where it does not.
Best for
Not ideal for
FAQ
Because we have not verified them for your batch, and fiber-filled parts fail exactly where an optimistic datasheet meets a real load. The TDS is supplied per batch, on request. That policy is the product.
PLA-CF at $18.99 if you want stiff jigs without changing how you print. PA6-GF or PPA-CF when temperature and toughness requirements force the move up. Ask with your use case through the wholesale form and we will point honestly.
A hardened nozzle is non-negotiable on all of them. The PLA and PP bases run on open machines; PA6, PPA, and PPS bases want high nozzle temperatures, a dry box, and preferably an enclosure. The per-line TDS states the envelope.
Single 1 kg spools of every line are on the storefront at the prices listed above. Buy one, print your worst part, then talk volumes through the wholesale form.
RELATED MATERIALS
WHOLESALE · DISTRIBUTION
Bundles, pallets, private-label supply: tell us what you move.